Makefile.in

Revision 519, 32.0 kB (checked in by kevn, 10 years ago)
added glove demo
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`

Line
1	# -----------------------------------------------------------------------------
2	# $Id$
3	#
4	# Base Makefile.in for VR Juggler. It requires GNU make.
5	# -----------------------------------------------------------------------------
6	# Targets are:
7	#
8	# all - Build everything.
9	# all-abi - Build everything using all supported ABIs.
10	# dbg - Build the debugging, static copy of the libraries.
11	# ddso - Build the debugging, dynamic shared object version of the
12	# libraries.
13	# opt - Build the optimized, static version of the libraries.
14	# dso - Build the dynamic shared object version of the libraries.
15	# obj - Build the object files using the default value for
16	# ${OBJDIR}.
17	# gui - Build the Java-based configuration GUI.
18	#
19	# links - Define links (for developer use only) that provide
20	# functionality allowing the use of the $VJ_BASE_DIR
21	# environment variable.
22	# clean-links - Remove the symlinks created by 'links'.
23	#
24	# static-libs - Build the static version of the libraries. This target
25	# depends on a correct value for ${LIBDIR} (that does not
26	# have a default value).
27	# shared-libs - Build the dynamic shared version of the libraries. This
28	# target depends on a correct value for ${LIBDIR} (that does
29	# not have a default value).
30	#
31	# install-all - Install all versions of the libraries, all header files,
32	# the Data directory, the configuration GUI and the test
33	# code.
34	# install-all-abi - Install every ABI possible on the target platform.
35	# install - Install the libraries, all header files, the Data
36	# directory, the configuration GUI and the test code.
37	# install-dbg - Install the debugging, static version of the libraries.
38	# install-ddso - Install the debugging, dynamic shared object version of
39	# the libraries.
40	# install-opt - Install the optimized, static version of the libraries.
41	# install-dso - Install the dynamic shared object version of the libraries.
42	# install-headers - Install only the header files.
43	# install-test - Install only the test code.
44	# install-data - Install only the Data directory.
45	# install-gui - Install only the configuration GUI.
46	#
47	# depend - Recursively build the dependencies for the source files.
48	# newdepend - Recursively (and forcibly) rebuild the dependencies for
49	# the source files.
50	#
51	# clean - Clean up everything (uses common 'clean' target).
52	# clobber - Clean up everything and remove the directories containing
53	# the compiled libraries and its object files.
54	#
55	# info - Print out information about the build process that may be
56	# useful to the user.
57	#
58	# The default target is 'dbg'. 'install' will install the debugging, static
59	# version of the libraries.
60	# -----------------------------------------------------------------------------
61
62	default: dbg
63
64	# Define ${_LOCAL_CLEAN} to inform the shared clean target that there is a
65	# '_clean' target to be run besides the standard 'clean' target. This must
66	# be done before Makefile.base is inlcuded (which in turn includes vj.clean.mk)
67	# so that the variable will be defined when parsing reaches the test for it.
68	_LOCAL_CLEAN = 1
69
70	# Include common definitions.
71	include @topdir@/Makefile.base
72
73	# Variables whose values are specific to this file.
74	includedir = @includedir@
75	instlinks = ${topdir}/instlinks
76	srcdir = @srcdir@
77	top_srcdir = @top_srcdir@
78	VJROOT = ${top_srcdir}
79	VJ_SRCDIR = @VJ_SRCDIR@
80	WORKDIR = ${topdir}
81
82	# Extra compiler and linker options needed only by this file.
83	OPT_FLAGS = -O @OPT_FLAGS@
84
85	# SGI-specific dynamic-shared-object information.
86	DSOREGFILE = @DSOREGFILE@
87	DSOVERSION = @DSOVERSION@
88	DSOVERSIONOPTS = @DSOVERSIONOPTS@
89
90	# Append ${DSOVERSIONOPTS} to ${LDOPTS} so that those extra options (if any)
91	# will be used by ${LD}.
92	LDOPTS := ${LDOPTS} ${DSOVERSIONOPTS}
93
94	# State whether or not to build the configuration editor GUI.
95	BUILD_GUI = @BUILD_GUI@
96
97	# Include library building and recursive target code.
98	include ${MKPATH}/vj.lib.mk
99	include ${MKPATH}/vj.rec.mk
100
101	# =============================================================================
102	# Build and installation directory naming and permission information.
103	# =============================================================================
104	_DEBUG_DIR = debug
105	_OPT_DIR = opt
106	_DEFAULT_DIR = ${_DEBUG_DIR}
107
108	_UMASK = 002
109	_FILE_PERMS = 664
110	_EXEC_PERMS = 775
111	_GROUP_NAME = c2dev
112
113	# ------------------------------------------------
114	# Object file build and installation directories.
115	# ------------------------------------------------
116	_BUILDDIR_BASE = ${topdir}/obj
117	_BUILDDIR = ${_BUILDDIR_BASE}/${PLATFORM}/${ABI}/${ISA}
118	_DBG_BUILDDIR = ${_BUILDDIR}/${_DEBUG_DIR}
119	_OPT_BUILDDIR = ${_BUILDDIR}/${_OPT_DIR}
120
121	# --------------------------------------------
122	# Library build and installation directories.
123	# --------------------------------------------
124
125	# ${_install_libdir_abs} is the full path to the base directory (minus any
126	# debugging or optimized subdirectories) where the libraries will be
127	# installed. ${_install_libdir_rel} is only the ${ISA} subdirectory of the
128	# full path.
129	_install_libdir_abs = ${libdir}${LIBBITSUF}/${ISA}
130	_install_libdir_rel = ./${ISA}
131
132	# ${_LIBDIR_NAME} is the name of the library directory including an ABI suffix
133	# if applicable.
134	_LIBDIR_NAME = lib${LIBBITSUF}
135
136	# ${_LIBDIR_BASE} is the base directory where the libraries will be built.
137	_LIBDIR_BASE = ${topdir}/${_LIBDIR_NAME}
138
139	# ${_LIBDIR} is the first-level subdirectory of ${_LIBDIR_BASE} that is
140	# named by the instruction set being used (${ISA}).
141	_LIBDIR = ${_LIBDIR_BASE}/${ISA}
142
143	# ${_DBG_LIBDIR} and ${_OPT_LIBDIR} are the directories where the libraries
144	# are actually built. The first is for a debugging copy of the libraries and
145	# the second is for an optimized version of the libraries.
146	_DBG_LIBDIR = ${_LIBDIR}/${_DEBUG_DIR}
147	_OPT_LIBDIR = ${_LIBDIR}/${_OPT_DIR}
148
149	SHLIB_MAJOR = 1
150	SHLIB_MINOR = 0
151
152	# Full names of the static and dynamic versions of the libraries.
153	VJ_LIB_STATIC = ${VJ_LIBRARY}.a
154	VJ_LIB_DYNAMIC = ${VJ_LIBRARY}.@SHAREDLIB_EXT@
155
156	GL_API = @OPENGL_API@
157	GL_LIB_STATIC = ${GL_LIBRARY}.a
158	GL_LIB_DYNAMIC = ${GL_LIBRARY}.@SHAREDLIB_EXT@
159
160	PF_API = @PERFORMER_API@
161	PF_LIB_STATIC = ${PF_LIBRARY}.a
162	PF_LIB_DYNAMIC = ${PF_LIBRARY}.@SHAREDLIB_EXT@
163
164	# =============================================================================
165	# Lists used for various types of recursion.
166	# =============================================================================
167
168	# Subdirectories used for recursion through the source tree.
169	SUBDIRS = Math Config Kernel Environment Performance Input \
170	SharedMem Sync Threads
171
172	# Subdirectories used for recursion through the test source tree when
173	# installing.
174	TEST_SUBDIRS = . CfgTest Matrix Quat Sync input ogl ogl/cubes \
175	ogl/glove ogl/simpleGlove ogl/wand pfNav testDynamicCastSTL threads
176
177	# The list of ABIs supported on this platform.
178	ABI_LIST = @ABI_LIST@
179
180	# =============================================================================
181	# Library targets. The default is 'dbg' as defined above. The steps for
182	# building the 'dbg', 'ddso', 'opt' and 'dso' are as follows:
183	#
184	# 1) Build dependencies (if necessary).
185	# 2) Compile all object files that are out of date.
186	# 3) Build the Java-based config editor (if necessary).
187	# 4) Compile the actual libraries from the object files.
188	# 5) Set up the developer installation links.
189	#
190	# These four particular targets are wrapper targets for simpler targets with
191	# an underscore ('_') prepended to the target name. It is in these simpler
192	# targets that the compilation is done. The wrapper targets define the order
193	# in which things take place.
194	# =============================================================================
195
196	# Build all four versions of the libraries.
197	all: beforebuild _opt _dso _dbg _ddso _check_gui
198	@echo "------------------------------------------------"
199	@echo "Creating symlinks in ${_LIBDIR}"
200	@echo "------------------------------------------------"
201	cd ${_LIBDIR} && \
202	rm -f ${VJ_LIB_STATIC} && ln -s ${_DEFAULT_DIR}/${VJ_LIB_STATIC} ./
203	cd ${_LIBDIR} && \
204	rm -f ${VJ_LIB_DYNAMIC} && ln -s ${_DEFAULT_DIR}/${VJ_LIB_DYNAMIC} ./
205	ifeq (${GL_API}, Y)
206	cd ${_LIBDIR} && \
207	rm -f ${GL_LIB_STATIC} && ln -s ${_DEFAULT_DIR}/${GL_LIB_STATIC} ./
208	cd ${_LIBDIR} && \
209	rm -f ${GL_LIB_DYNAMIC} && ln -s ${_DEFAULT_DIR}/${GL_LIB_DYNAMIC} ./
210	endif
211	ifeq (${PF_API}, Y)
212	cd ${_LIBDIR} && \
213	rm -f ${PF_LIB_STATIC} && ln -s ${_DEFAULT_DIR}/${PF_LIB_STATIC} ./
214	cd ${_LIBDIR} && \
215	rm -f ${PF_LIB_DYNAMIC} && ln -s ${_DEFAULT_DIR}/${PF_LIB_DYNAMIC} ./
216	endif
217	${MAKE} afterbuild
218
219	# Build all ABIs in ${ABI_LIST}.
220	all-abi:
221	@abi_list='${ABI_LIST}' ; \
222	for abi in $$abi_list ; do \
223	echo "------------------------------------------------" ; \
224	echo "Building libraries using $$abi" ; \
225	echo "------------------------------------------------" ; \
226	echo "${MAKE} vjABI=$$abi all" ; \
227	${MAKE} vjABI=$$abi all ; \
228	done
229
230	# Things to do before the object files and library are built.
231	beforebuild: depend
232
233	# Things to do after the object files and library are built.
234	afterbuild: links
235	@echo "------------------------------------------------"
236	@echo "Library build complete"
237	@echo "------------------------------------------------"
238
239	# ---------------------------------------------
240	# Make the debugging version of the libraries.
241	# ---------------------------------------------
242	dbg: beforebuild _dbg _check_gui afterbuild
243
244	_dbg: _build_dbg
245	${MAKE} BASE_OBJDIR="${_DBG_BUILDDIR}" LIBDIR="${_DBG_LIBDIR}" \
246	${VJ_LIB_STATIC}
247	ifeq (${GL_API}, Y)
248	${MAKE} BASE_OBJDIR="${_DBG_BUILDDIR}/GL" \
249	LIBDIR="${_DBG_LIBDIR}" ${GL_LIB_STATIC}
250	endif
251	ifeq (${PF_API}, Y)
252	${MAKE} BASE_OBJDIR="${_DBG_BUILDDIR}/Pf" \
253	LIBDIR="${_DBG_LIBDIR}" ${PF_LIB_STATIC}
254	endif
255
256	# ------------------------------------------------------------
257	# Make the debugging version of the libraries that uses DSOs.
258	# ------------------------------------------------------------
259	ddso: beforebuild _ddso _check_gui afterbuild
260
261	_ddso: _build_dbg
262	${MAKE} BASE_OBJDIR="${_DBG_BUILDDIR}" LIBDIR="${_DBG_LIBDIR}" \
263	${VJ_LIB_DYNAMIC}
264	ifeq (${GL_API}, Y)
265	${MAKE} BASE_OBJDIR="${_DBG_BUILDDIR}/GL" \
266	LIBDIR="${_DBG_LIBDIR}" ${GL_LIB_DYNAMIC}
267	endif
268	ifeq (${PF_API}, Y)
269	${MAKE} BASE_OBJDIR="${_DBG_BUILDDIR}/Pf" \
270	LIBDIR="${_DBG_LIBDIR}" ${PF_LIB_DYNAMIC}
271	endif
272
273	# ---------------------------------------------
274	# Make the optimized version of the libraries.
275	# ---------------------------------------------
276	opt: beforebuild _opt _check_gui afterbuild
277
278	_opt: _build_opt
279	${MAKE} BASE_OBJDIR="${_OPT_BUILDDIR}" LIBDIR="${_OPT_LIBDIR}" \
280	${VJ_LIB_STATIC}
281	ifeq (${GL_API}, Y)
282	${MAKE} BASE_OBJDIR="${_OPT_BUILDDIR}/GL" \
283	LIBDIR="${_OPT_LIBDIR}" ${GL_LIB_STATIC}
284	endif
285	ifeq (${PF_API}, Y)
286	${MAKE} BASE_OBJDIR="${_OPT_BUILDDIR}/Pf" \
287	LIBDIR="${_OPT_LIBDIR}" ${PF_LIB_STATIC}
288	endif
289
290	# ------------------------------------------------------------
291	# Make the optimized version of the libraries that uses DSOs.
292	# ------------------------------------------------------------
293	dso: beforebuild _dso _check_gui afterbuild
294
295	_dso: _build_opt
296	${MAKE} BASE_OBJDIR="${_OPT_BUILDDIR}" LIBDIR="${_OPT_LIBDIR}" \
297	${VJ_LIB_DYNAMIC}
298	ifeq (${GL_API}, Y)
299	${MAKE} BASE_OBJDIR="${_OPT_BUILDDIR}/GL" \
300	LIBDIR="${_OPT_LIBDIR}" ${GL_LIB_DYNAMIC}
301	endif
302	ifeq (${PF_API}, Y)
303	${MAKE} BASE_OBJDIR="${_OPT_BUILDDIR}/Pf" \
304	LIBDIR="${_OPT_LIBDIR}" ${PF_LIB_DYNAMIC}
305	endif
306
307	# ---------------------------------------------------------
308	# Build the object files with the debugging flags enabled.
309	# ---------------------------------------------------------
310	_build_dbg:
311	@echo "------------------------------------------------"
312	@echo "Making DBG version of libraries"
313	@echo "------------------------------------------------"
314	${scriptdir}/mkinstalldirs ${_DBG_BUILDDIR}
315	@echo "------------------------------------------------"
316	@echo "Building object files"
317	@echo "------------------------------------------------"
318	${MAKE} RECTARGET="dbg" OPTIMIZER="-g" \
319	BASE_OBJDIR="${_DBG_BUILDDIR}" recursive
320
321	# ------------------------------------------------------------
322	# Build the object files with the optimization flags enabled.
323	# ------------------------------------------------------------
324	_build_opt:
325	@echo "------------------------------------------------"
326	@echo "Making OPT version of libraries"
327	@echo "------------------------------------------------"
328	${scriptdir}/mkinstalldirs ${_OPT_BUILDDIR}
329	@echo "------------------------------------------------"
330	@echo "Building object files"
331	@echo "------------------------------------------------"
332	${MAKE} RECTARGET="opt" OPTIMIZER="${OPT_FLAGS}" \
333	BASE_OBJDIR="${_OPT_BUILDDIR}" recursive
334
335	# --------------------------------------------------------------------
336	# Build only the object files using the default values for ${OBJDIR}.
337	# --------------------------------------------------------------------
338	obj:
339	@echo "------------------------------------------------"
340	@echo "Making library object files"
341	@echo "------------------------------------------------"
342	${MAKE} RECTARGET="$@" recursive
343	@echo "------------------------------------------------"
344	@echo "Object files built"
345	@echo "------------------------------------------------"
346
347	# -----------------------
348	# Dependency generation.
349	# -----------------------
350	depend: .depend_done
351
352	newdepend:
353	@echo "------------------------------------------------"
354	@echo "Regenerating dependencies"
355	@echo "------------------------------------------------"
356	-@rm -f .depend_done
357	${MAKE} RECTARGET="$@" recursive
358	@touch .depend_done
359
360	.depend_done:
361	@echo "------------------------------------------------"
362	@echo "Generating dependencies"
363	@echo "------------------------------------------------"
364	${MAKE} RECTARGET="depend" recursive
365	@touch .depend_done
366
367	# -----------------------------------------------
368	# Construct the static version of the libraries.
369	# -----------------------------------------------
370	static-libs: ${VJ_LIB_STATIC} ${PF_LIB_STATIC} ${GL_LIB_STATIC}
371
372	${VJ_LIB_STATIC} ${PF_LIB_STATIC} ${GL_LIB_STATIC}:
373	@echo "------------------------------------------------"
374	@echo "Creating $@"
375	@echo "------------------------------------------------"
376	${scriptdir}/mkinstalldirs ${LIBDIR}
377	${MAKE} LIBDIR="${LIBDIR}" LIBNAME="$@" OBJS="${OBJDIR}/*.o" static-lib
378	cd ${_LIBDIR_BASE} && ln -sf ${LIBDIR}/$@ ./
379	@echo "------------------------------------------------"
380	@echo "$@ done"
381	@echo "------------------------------------------------"
382
383	# -------------------------------------------------------
384	# Construct the dynamic shared version of the libraries.
385	# -------------------------------------------------------
386	shared-libs: ${VJ_LIB_DYNAMIC} ${PF_LIB_DYNAMIC} ${GL_LIB_DYNAMIC}
387
388	${VJ_LIB_DYNAMIC} ${PF_LIB_DYNAMIC} ${GL_LIB_DYNAMIC}:
389	@echo "------------------------------------------------"
390	@echo "Creating $@"
391	@echo "------------------------------------------------"
392	${scriptdir}/mkinstalldirs ${LIBDIR}
393	${MAKE} LIBDIR="${LIBDIR}" LIBNAME="$@" OBJS="${OBJDIR}/*.o" shared-lib
394	cd ${_LIBDIR_BASE} && ln -sf ${LIBDIR}/$@ ./
395	@echo "------------------------------------------------"
396	@echo "$@ done"
397	@echo "------------------------------------------------"
398
399	# =============================================================================
400	# Java-based configuration editor targets.
401	# =============================================================================
402
403	# This is a wrapper for the 'gui' target that checks for the mere existence
404	# of the JAR file before compiling the GUI code.
405	_check_gui:
406	@if [ ! -e ${topdir}/GUI/VjControl.jar ] ; then \
407	${MAKE} gui ; \
408	fi
409
410	# Build the Java-based configuration GUI.
411	gui:
412	ifeq (${BUILD_GUI}, Y)
413	@echo "------------------------------------------------"
414	@echo "Building GUI"
415	@echo "------------------------------------------------"
416	cd GUI && ${MAKE} all
417	@echo "------------------------------------------------"
418	@echo "GUI done"
419	@echo "------------------------------------------------"
420	else
421	@echo "------------------------------------------------"
422	@echo "GUI cannot be built without javac"
423	@echo "------------------------------------------------"
424	endif
425
426	# =============================================================================
427	# Make links for developer use that provide the needed functionality for
428	# the $VJ_BASE_DIR environment variable to be used when needed. $VJ_BASE_DIR
429	# should be set to ${instlinks}.
430	# =============================================================================
431	links:
432	@echo "------------------------------------------------"
433	@echo "Setting up developer installation links"
434	@echo "------------------------------------------------"
435	${scriptdir}/mkinstalldirs ${instlinks}
436	${scriptdir}/mkinstalldirs ${instlinks}/include
437	cd ${instlinks}/include && \
438	dir_list='${SUBDIRS}' ; \
439	for dir in $$dir_list ; do \
440	rm -f ./$$dir ; \
441	ln -s ${VJROOT_ABS}/$$dir ./$$dir ; \
442	done
443	cd ${instlinks} && rm -f ./${_LIBDIR_NAME} && \
444	ln -s ${_LIBDIR_BASE} ./${_LIBDIR_NAME}
445	cd ${instlinks} && rm -f ./Data && ln -s ${VJROOT_ABS}/Data ./Data
446	cd ${instlinks}/include && ln -sf ${VJROOT_ABS}/vjConfig.h ./vjConfig.h
447	cd ${instlinks}/include && ln -sf ${topdir}/vjDefines.h ./vjDefines.h
448	${scriptdir}/mkinstalldirs ${instlinks}/bin
449	cd ${instlinks}/bin && ln -sf ${topdir}/GUI/VjControl.jar ./
450	cd ${instlinks}/bin && ln -sf ${VJROOT_ABS}/GUI/vjcontrol ./vjcontrol
451	@echo "\n\n"
452	@echo "---------------------------------------------------------------"
453	@echo 'You should now set $$VJ_BASE_DIR to:'
454	@cd ${instlinks} && echo " `pwd`"
455	@echo "---------------------------------------------------------------"
456
457	# Remove the links in ${instlinks}.
458	clean-links:
459	@echo "------------------------------------------------"
460	@echo "Removing developer installation links"
461	@echo "------------------------------------------------"
462	rm -rf ${instlinks}
463
464	# =============================================================================
465	# Installation targets. The default (what is done by 'install') is to install
466	# the static debugging version of the libraries. The steps taken for a full
467	# installation are:
468	#
469	# 1) Ensure that everything is built.
470	# 2) Create the installation directory.
471	# 3) Install the libraries.
472	# 4) Install the header files.
473	# 5) Install the test programs.
474	# 6) Install the contents of the Data directory.
475	# 7) Install the Java-based config editor (if possible).
476	# =============================================================================
477
478	# Steps to take before beginning the installation process.
479	beforeinstall:
480	${scriptdir}/mkinstalldirs ${prefix}
481	${MTREE_CMD} -Ude -f ${mtreedir}/VJ.install.dist -p ${prefix}
482
483	# Steps to take after the installation process is complete.
484	afterinstall:
485	@echo "------------------------------------------------"
486	@echo "Library installation complete"
487	@echo "------------------------------------------------"
488
489	# Do a full installation all versions of the libraries and the associated
490	# files.
491	install-all: beforeinstall install-opt install-dso install-dbg \
492	install-ddso install-headers install-test install-data \
493	install-gui
494	@echo "------------------------------------------------"
495	@echo "Creating symlinks in ${_install_libdir_abs}"
496	@echo "------------------------------------------------"
497	cd ${_install_libdir_abs} && umask ${_UMASK} && \
498	rm -f ${VJ_LIB_STATIC} && ln -s ${_DEFAULT_DIR}/${VJ_LIB_STATIC} ./
499	cd ${_install_libdir_abs} && umask ${_UMASK} && \
500	rm -f ${VJ_LIB_DYNAMIC} && ln -s ${_DEFAULT_DIR}/${VJ_LIB_DYNAMIC} ./
501	ifeq (${GL_API}, Y)
502	cd ${_install_libdir_abs} && umask ${_UMASK} && \
503	rm -f ${GL_LIB_STATIC} && ln -s ${_DEFAULT_DIR}/${GL_LIB_STATIC} ./
504	cd ${_install_libdir_abs} && umask ${_UMASK} && \
505	rm -f ${GL_LIB_DYNAMIC} && ln -s ${_DEFAULT_DIR}/${GL_LIB_DYNAMIC} ./
506	endif
507	ifeq (${PF_API}, Y)
508	cd ${_install_libdir_abs} && umask ${_UMASK} && \
509	rm -f ${PF_LIB_STATIC} && ln -s ${_DEFAULT_DIR}/${PF_LIB_STATIC} ./
510	cd ${_install_libdir_abs} && umask ${_UMASK} && \
511	rm -f ${PF_LIB_DYNAMIC} && ln -s ${_DEFAULT_DIR}/${PF_LIB_DYNAMIC} ./
512	endif
513	${MAKE} afterinstall
514
515	# Do a full installation of all versions of the libraries built in each of the
516	# ABIs in ${ABI_LIST}.
517	install-all-abi:
518	@abi_list='${ABI_LIST}' ; \
519	for abi in $$abi_list ; do \
520	echo "------------------------------------------------" ; \
521	echo "Installing $$abi version of libraries" ; \
522	echo "------------------------------------------------" ; \
523	${MAKE} vjABI=$$abi install-all ; \
524	done
525	@echo "------------------------------------------------"
526	@echo "install-all-abi done"
527	@echo "------------------------------------------------"
528
529	# Do a full installation of the static debugging version of the libraries.
530	install: beforeinstall install-dbg install-headers install-test \
531	install-data install-gui afterinstall
532
533	# ------------------------------------------------------------
534	# Install only the static debugging version of the libraries.
535	# ------------------------------------------------------------
536	install-dbg: dbg
537	@echo "------------------------------------------------"
538	@echo "Installing static debugging libraries"
539	@echo "------------------------------------------------"
540	${MTREE_CMD} -Ude -p ${prefix} \
541	-f ${mtreedir_os}/VJ.lib${LIBBITSUF}${ISA}.dist
542	${INSTALL} -m ${_FILE_PERMS} -g ${_GROUP_NAME} \
543	${_DBG_LIBDIR}/${VJ_LIB_STATIC} ${_install_libdir_abs}/${_DEBUG_DIR}/
544	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
545	ln -sf ${_install_libdir_rel}/${_DEBUG_DIR}/${VJ_LIB_STATIC} ./
546	ifeq (${GL_API}, Y)
547	${INSTALL} -m ${_FILE_PERMS} -g ${_GROUP_NAME} \
548	${_DBG_LIBDIR}/${GL_LIB_STATIC} ${_install_libdir_abs}/${_DEBUG_DIR}/
549	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
550	ln -sf ${_install_libdir_rel}/${_DEBUG_DIR}/${GL_LIB_STATIC} ./
551	endif
552	ifeq (${PF_API}, Y)
553	${INSTALL} -m ${_FILE_PERMS} -g ${_GROUP_NAME} \
554	${_DBG_LIBDIR}/${PF_LIB_STATIC} ${_install_libdir_abs}/${_DEBUG_DIR}/
555	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
556	ln -sf ${_install_libdir_rel}/${_DEBUG_DIR}/${PF_LIB_STATIC} ./
557	endif
558
559	# -------------------------------------------------------------
560	# Install only the dynamic debugging version of the libraries.
561	# -------------------------------------------------------------
562	install-ddso: ddso
563	@echo "------------------------------------------------"
564	@echo "Installing dynamic debugging libraries"
565	@echo "------------------------------------------------"
566	${MTREE_CMD} -Ude -p ${prefix} \
567	-f ${mtreedir_os}/VJ.lib${LIBBITSUF}${ISA}.dist
568	${INSTALL} -m ${_EXEC_PERMS} -g ${_GROUP_NAME} \
569	${_DBG_LIBDIR}/${VJ_LIB_DYNAMIC} ${_install_libdir_abs}/${_DEBUG_DIR}/
570	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
571	ln -sf ${_install_libdir_rel}/${_DEBUG_DIR}/${VJ_LIB_DYNAMIC} ./
572	ifeq (${GL_API}, Y)
573	${INSTALL} -m ${_EXEC_PERMS} -g ${_GROUP_NAME} \
574	${_DBG_LIBDIR}/${GL_LIB_DYNAMIC} ${_install_libdir_abs}/${_DEBUG_DIR}/
575	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
576	ln -sf ${_install_libdir_rel}/${_DEBUG_DIR}/${GL_LIB_DYNAMIC} ./
577	endif
578	ifeq (${PF_API}, Y)
579	${INSTALL} -m ${_EXEC_PERMS} -g ${_GROUP_NAME} \
580	${_DBG_LIBDIR}/${PF_LIB_DYNAMIC} ${_install_libdir_abs}/${_DEBUG_DIR}/
581	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
582	ln -sf ${_install_libdir_rel}/${_DEBUG_DIR}/${PF_LIB_DYNAMIC} ./
583	endif
584
585	# ------------------------------------------------------------
586	# Install only the static optimized version of the libraries.
587	# ------------------------------------------------------------
588	install-opt: opt
589	@echo "------------------------------------------------"
590	@echo "Installing static optimized libraries"
591	@echo "------------------------------------------------"
592	${MTREE_CMD} -Ud -p ${prefix} \
593	-f ${mtreedir_os}/VJ.lib${LIBBITSUF}${ISA}.dist
594	${INSTALL} -m ${_FILE_PERMS} -g ${_GROUP_NAME} \
595	${_OPT_LIBDIR}/${VJ_LIB_STATIC} ${_install_libdir_abs}/${_OPT_DIR}/
596	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
597	ln -sf ${_install_libdir_rel}/${_OPT_DIR}/${VJ_LIB_STATIC} ./
598	ifeq (${GL_API}, Y)
599	${INSTALL} -m ${_FILE_PERMS} -g ${_GROUP_NAME} \
600	${_OPT_LIBDIR}/${GL_LIB_STATIC} ${_install_libdir_abs}/${_OPT_DIR}/
601	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
602	ln -sf ${_install_libdir_rel}/${_OPT_DIR}/${GL_LIB_STATIC} ./
603	endif
604	ifeq (${PF_API}, Y)
605	${INSTALL} -m ${_FILE_PERMS} -g ${_GROUP_NAME} \
606	${_OPT_LIBDIR}/${PF_LIB_STATIC} ${_install_libdir_abs}/${_OPT_DIR}/
607	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
608	ln -sf ${_install_libdir_rel}/${_OPT_DIR}/${PF_LIB_STATIC} ./
609	endif
610
611	# -------------------------------------------------------------
612	# Install only the dynamic optimized version of the libraries.
613	# -------------------------------------------------------------
614	install-dso: dso
615	@echo "------------------------------------------------"
616	@echo "Installing dynamic optimizied libraries"
617	@echo "------------------------------------------------"
618	${MTREE_CMD} -Ude -p ${prefix} \
619	-f ${mtreedir_os}/VJ.lib${LIBBITSUF}${ISA}.dist
620	${INSTALL} -m ${_EXEC_PERMS} -g ${_GROUP_NAME} \
621	${_OPT_LIBDIR}/${VJ_LIB_DYNAMIC} ${_install_libdir_abs}/${_OPT_DIR}/
622	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
623	ln -sf ${_install_libdir_rel}/${_OPT_DIR}/${VJ_LIB_DYNAMIC} ./
624	ifeq (${GL_API}, Y)
625	${INSTALL} -m ${_EXEC_PERMS} -g ${_GROUP_NAME} \
626	${_OPT_LIBDIR}/${GL_LIB_DYNAMIC} ${_install_libdir_abs}/${_OPT_DIR}/
627	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
628	ln -sf ${_install_libdir_rel}/${_OPT_DIR}/${GL_LIB_DYNAMIC} ./
629	endif
630	ifeq (${PF_API}, Y)
631	${INSTALL} -m ${_EXEC_PERMS} -g ${_GROUP_NAME} \
632	${_OPT_LIBDIR}/${PF_LIB_DYNAMIC} ${_install_libdir_abs}/${_OPT_DIR}/
633	cd ${libdir}${LIBBITSUF} && umask ${_UMASK} && \
634	ln -sf ${_install_libdir_rel}/${_OPT_DIR}/${PF_LIB_DYNAMIC} ./
635	endif
636
637	# Install the header files.
638	install-headers:
639	@echo "------------------------------------------------"
640	@echo "Installing header files"
641	@echo "------------------------------------------------"
642	${MTREE_CMD} -Ude -f ${mtreedir}/VJ.include.dist -p ${prefix}
643	${MAKE} RECTARGET="install" recursive
644	@cat ${VJROOT_ABS}/vjConfig.h \| \
645	sed -e 's/^#ifdef HAVE_CONFIG_H//' \
646	-e 's/^#endif..HAVE_CONFIG_H.$$//' >./vjConfig.tmp
647	${INSTALL} -m ${_FILE_PERMS} -g ${_GROUP_NAME} \
648	./vjConfig.tmp ${includedir}/vjConfig.h
649	@-rm -f ./vjConfig.tmp
650	${INSTALL} -m ${_FILE_PERMS} -g ${_GROUP_NAME} \
651	${topdir}/vjDefines.h ${includedir}
652
653	# Install the test programs.
654	install-test:
655	@echo "------------------------------------------------"
656	@echo "Installing test programs"
657	@echo "------------------------------------------------"
658	${MTREE_CMD} -Ude -f ${mtreedir}/VJ.test.dist -p ${prefix}
659	${scriptdir}/install-src.pl -i ${top_srcdir}/test \
660	-m ${_FILE_PERMS} -g ${_GROUP_NAME} -o ${prefix}/test
661	${scriptdir}/makefiles-gen.pl --CXX="${CXX}" --DEFS="${DEFS}" \
662	--CPPFLAGS="${CPPFLAGS}" --CXXFLAGS="${CXXFLAGS}" \
663	--INCLUDES="@INCLUDES@" --startdir="${top_srcdir}/test" \
664	--SUBDIRS="${TEST_SUBDIRS}" --mode="${_FILE_PERMS}" \
665	--gname="${_GROUP_NAME}" --srcdir="." \
666	--prefix="${prefix}/test" \
667	--TEST_VJ_LIBS_BASIC='@TEST_VJ_LIBS_BASIC_SUBST@' \
668	--TEST_VJ_LIBS_GL='@TEST_VJ_LIBS_GL@' \
669	--TEST_VJ_LIBS_PF='@TEST_VJ_LIBS_PF@' \
670	--TEST_LIBS_BASIC='@TEST_LIBS_BASIC@' \
671	--TEST_EXTRA_LIBS_BASIC="@TEST_EXTRA_LIBS_BASIC_SUBST@" \
672	--TEST_EXTRA_LIBS_GL="@TEST_EXTRA_LIBS_GL_SUBST@" \
673	--TEST_EXTRA_LIBS_PF="@TEST_EXTRA_LIBS_PF@"
674
675	# Install the standard data files.
676	install-data:
677	@echo "------------------------------------------------"
678	@echo "Installing standard data files"
679	@echo "------------------------------------------------"
680	${MTREE_CMD} -Ude -f ${mtreedir}/VJ.data.dist -p ${prefix}
681	${scriptdir}/install-dir.pl -i ${top_srcdir}/Data \
682	-m ${_FILE_PERMS} -g ${_GROUP_NAME} -o ${prefix}/Data
683
684	# Install the Java-based config editor if possible.
685	install-gui: _check_gui
686	ifeq (${BUILD_GUI}, Y)
687	@echo "------------------------------------------------"
688	@echo "Installing vjcontrol"
689	@echo "------------------------------------------------"
690	${INSTALL} -m ${_FILE_PERMS} -g ${_GROUP_NAME} \
691	${topdir}/GUI/VjControl.jar ${bindir}
692	${INSTALL} -m ${_EXEC_PERMS} -g ${_GROUP_NAME} \
693	${VJROOT_ABS}/GUI/vjcontrol ${bindir}/vjcontrol
694	else
695	@echo "------------------------------------------------"
696	@echo "Skipping installation of vjcontrol (not built)"
697	@echo "------------------------------------------------"
698	endif
699
700	# =============================================================================
701	# Clean-up targets. '_clean' removes all the files in the build directories.
702	# 'clobber' removes the ${_BUILDDIR_BASE} and ${_LIBDIR_NAME} directories.
703	# =============================================================================
704	_clean:
705	@echo "------------------------------------------------"
706	@echo "Cleaning up the build tree"
707	@echo "------------------------------------------------"
708	${MAKE} RECTARGET="clean" recursive
709	cd GUI && ${MAKE} clean
710	@if test -d ${_DBG_BUILDDIR}; then \
711	echo "------------------------------------------------" ; \
712	echo "Removing ${_DBG_BUILDDIR} ..." ; \
713	echo "------------------------------------------------" ; \
714	rm -r ${_DBG_BUILDDIR} ; \
715	fi
716	@if test -d ${_OPT_BUILDDIR}; then \
717	echo "------------------------------------------------" ; \
718	echo "Removing ${_OPT_BUILDDIR} ..." ; \
719	echo "------------------------------------------------" ; \
720	rm -r ${_OPT_BUILDDIR} ; \
721	fi
722	-@rm -f .*_done
723	rm -f so_locations
724	@echo "------------------------------------------------"
725	@echo "Done with 'clean'"
726	@echo "------------------------------------------------"
727
728	clobber: _clean clean-links
729	@echo "------------------------------------------------"
730	@echo "Clobbering build directories"
731	@echo "------------------------------------------------"
732	@if test -d ${_BUILDDIR_BASE} ; then \
733	echo "------------------------------------------------" ; \
734	echo "Removing ${_BUILDDIR_BASE} ..." ; \
735	echo "------------------------------------------------" ; \
736	rm -rf ${_BUILDDIR_BASE} ; \
737	fi
738	@if test -d ${_LIBDIR_NAME}; then \
739	echo "------------------------------------------------" ; \
740	echo "Removing ${_LIBDIR_NAME} ..." ; \
741	echo "------------------------------------------------" ; \
742	rm -rf ${_LIBDIR_NAME} ; \
743	fi
744	@echo "------------------------------------------------"
745	@echo "Done with 'clobber'"
746	@echo "------------------------------------------------"
747
748	# =============================================================================
749	# Human-readable information about the build system.
750	# =============================================================================
751	info::
752	@echo "\nInfo for the make of ${VJ_LIBRARY}"
753	@echo "\nOBJDIR: ${OBJDIR}"
754	@echo "VJROOT_ABS: ${VJROOT_ABS}"
755	@echo "Default ABI: ${ABI}"
756	@echo "Default instruction set architecture: ${ISA}"
757	@echo "ABI list: ${ABI_LIST}"
758	@echo "DBG_BUILDDIR: ${_DBG_BUILDDIR}"
759	@echo "OPT_BUILDDIR: ${_OPT_BUILDDIR}"
760	@echo "Installation prefix: ${prefix}"
761	@echo "includedir: ${includedir}"
762	@echo "libdir: ${libdir}"
763	@${scriptdir}/print-targets.sh

Note: See TracBrowser for help on using the browser.

Download in other formats:

Original Format